| Quantity: | |
|---|---|
Machine description：
1. Synchronous mechanism transmission, any transmission belt replacement can be quickly completed, and the traditional multi-layer arm type (replacement and maintenance takes more than six hours) is easier to maintain, simple maintenance, and will not affect production.
2. Changing the mark is absolutely fast and labor-saving, and the cutting position is absolutely accurate.
3. Feeding mechanism: dynamic synchronous tension control supply label, supply capacity of 90 meters/min, coil supply plate 500mm, paper tube inner diameter 4 ', 8 ', 10 'can be, feeding stable tension mechanism design, to ensure the accuracy of cutting the length of the mark, supply stability, fast, to ensure the accuracy of sending and shooting the mark.
4. The servo marking mechanism of the center guide column, the marking speed is 300 bottles/min.
5. The new cutting tool is designed to be driven by servo motor, with high speed, stable and accurate action, smooth incision and beautiful shrinkage. With the label synchronous positioning mechanism, the incision positioning accuracy is up to 1mm.
6. Multi-point emergency stop button, can be installed in the appropriate position of the production line emergency stop button, so that online production safety, smooth production.
7. Special design of hot air shrinkage furnace, the use of high pressure fan, special hot air shrink ring air duct is more energy saving, the shrinkage effect is unparalleled, if the traditional shrink furnace can not shrink the curve bottle, by the hot air shrinkage furnace can be satisfied and easy to repair, shrink flat, steam ejection mode adopts the design of steam drum, the pipe is smooth and does not take up space, each side of the spray outlet is divided into four sections, The height, front and rear of each section and the output volume can be adjusted separately to achieve the most perfect contraction effect. The low pressure drum adopts seamless steel pipe design, and each connection adopts stainless steel hose quick joint, which is easy to disassemble and install. The whole shell is made of stainless steel and insulated, which not only saves energy, but also meets international safety standards. The bottom stainless steel water tray is concentrated condensed water, which can be taken over and discharged. The working environment is not affected. The whole machine adopts waterproof design, is made of stainless steel, easy to operate and maintain.
Main technical parameters of the equipment:
The standard equipment includes: automatic marking machine, 1.8m steam shrinkage furnace, 18KW steam generator.
Voltage specification: 1, host: AC220V, 50/60HZ, 2.5KW, single phase
Equipment size: 1, set the standard machine host size: L2000mm * W850mm * H2000mm
2, steam shrinkage furnace:
Steam consumption: 50Kg/hour
Steam pressure: 1Kg/cm2
Volume of steam shrinkage furnace: L1800mm * W500mm * H1500mm
Electric shrinkage furnace volume: L2000mm * W500mm * H1600mm
Power: 10KW ~15KW Voltage: 3,380 VAC
For different and irregular round bottles, square bottles, flat bottles and other bottle shapes, easy to adjust, maintenance, shrinkage flat, steam ejection method using steam drum design type, smooth pipe does not take up space, each side of the spray outlet is divided into four sections, the height of each section, before and after and gas output can be adjusted respectively to achieve the most perfect contraction effect of the state. The low pressure drum adopts seamless steel pipe design, and each connection adopts stainless steel hose quick joint, which is easy to disassemble and install. The whole shell is made of stainless steel and insulated, which not only saves energy, but also meets international safety standards. The bottom stainless steel water tray is concentrated condensed water, which can be taken over and discharged. The working environment is not affected. The whole machine adopts waterproof design, is made of stainless steel, easy to operate and maintain.
Machine description：
1. Synchronous mechanism transmission, any transmission belt replacement can be quickly completed, and the traditional multi-layer arm type (replacement and maintenance takes more than six hours) is easier to maintain, simple maintenance, and will not affect production.
2. Changing the mark is absolutely fast and labor-saving, and the cutting position is absolutely accurate.
3. Feeding mechanism: dynamic synchronous tension control supply label, supply capacity of 90 meters/min, coil supply plate 500mm, paper tube inner diameter 4 ', 8 ', 10 'can be, feeding stable tension mechanism design, to ensure the accuracy of cutting the length of the mark, supply stability, fast, to ensure the accuracy of sending and shooting the mark.
4. The servo marking mechanism of the center guide column, the marking speed is 300 bottles/min.
5. The new cutting tool is designed to be driven by servo motor, with high speed, stable and accurate action, smooth incision and beautiful shrinkage. With the label synchronous positioning mechanism, the incision positioning accuracy is up to 1mm.
6. Multi-point emergency stop button, can be installed in the appropriate position of the production line emergency stop button, so that online production safety, smooth production.
7. Special design of hot air shrinkage furnace, the use of high pressure fan, special hot air shrink ring air duct is more energy saving, the shrinkage effect is unparalleled, if the traditional shrink furnace can not shrink the curve bottle, by the hot air shrinkage furnace can be satisfied and easy to repair, shrink flat, steam ejection mode adopts the design of steam drum, the pipe is smooth and does not take up space, each side of the spray outlet is divided into four sections, The height, front and rear of each section and the output volume can be adjusted separately to achieve the most perfect contraction effect. The low pressure drum adopts seamless steel pipe design, and each connection adopts stainless steel hose quick joint, which is easy to disassemble and install. The whole shell is made of stainless steel and insulated, which not only saves energy, but also meets international safety standards. The bottom stainless steel water tray is concentrated condensed water, which can be taken over and discharged. The working environment is not affected. The whole machine adopts waterproof design, is made of stainless steel, easy to operate and maintain.
Main technical parameters of the equipment:
The standard equipment includes: automatic marking machine, 1.8m steam shrinkage furnace, 18KW steam generator.
Voltage specification: 1, host: AC220V, 50/60HZ, 2.5KW, single phase
Equipment size: 1, set the standard machine host size: L2000mm * W850mm * H2000mm
2, steam shrinkage furnace:
Steam consumption: 50Kg/hour
Steam pressure: 1Kg/cm2
Volume of steam shrinkage furnace: L1800mm * W500mm * H1500mm
Electric shrinkage furnace volume: L2000mm * W500mm * H1600mm
Power: 10KW ~15KW Voltage: 3,380 VAC
For different and irregular round bottles, square bottles, flat bottles and other bottle shapes, easy to adjust, maintenance, shrinkage flat, steam ejection method using steam drum design type, smooth pipe does not take up space, each side of the spray outlet is divided into four sections, the height of each section, before and after and gas output can be adjusted respectively to achieve the most perfect contraction effect of the state. The low pressure drum adopts seamless steel pipe design, and each connection adopts stainless steel hose quick joint, which is easy to disassemble and install. The whole shell is made of stainless steel and insulated, which not only saves energy, but also meets international safety standards. The bottom stainless steel water tray is concentrated condensed water, which can be taken over and discharged. The working environment is not affected. The whole machine adopts waterproof design, is made of stainless steel, easy to operate and maintain.
