MW-SLLS Log Slitting Machine

1．Use for cutting kinds of 3M, Tesa, Nitto brands tapes.such as EVA, Mylar, masking, double-side, aluminum tapes

2．Characteristics:

2.1 the circle blade can automatically adjust the cutting angle, to insure that all products end face is smooth, flat, non-protruding roll phenomenon.

2.2 PLC program control, touch screen data entry and display, 10 programs can be preset automatic continuous execution. Angle and width settings are automatically jumps to next or manual operation jump, with no downtime.

2.3 Big diameter cutting ability ,new design outward

2.4 High-automatic, controlled by computer program, adopt 7”touching panel and put into the operating order by touching the panel

2.5 Dropping cooling system

2.6 The cutter orientation is very accurate and the error range≤±0.1MM  (outer diameter 150MM or less).

2.7 The product roller’s end face is very flattening without the phenomenon of convexo or concave, the error range of the product’s inside diameter and the outside diameter≤±0.15MM

2.8 Imported servo motor control cutter, speed up to 0.5 seconds / knife, faster than the hydraulic models more than doubled.

2.9 Can accurately adjust the speed of blank, materials and paper corn. improve work efficiency. You can set speed of the first cut and the final special, use for hard material of the low-speed with angle cut

2.10 You can choose whether to automatically open the rear chuck After cutting is completed according to the properties of materials, process more efficiency

3 Technical parameter of the machine：

3.1. width of the cutting shaft:        1600mm

3.2. Cutting width:                     1-1600mm

3.3. Inner diameter of the paper core:   76mm(3")

3.4. Max.cutting diameter:              300mm

3.5. Electric power:                    380V  50HZ

4. Configuration of the Machine ：       

4.1. Motor of main shaft   AC  5HP Frequency converter(import product)

4.2. Motor of the circular blade AC 3HP Frequency converter(import product)

4.3. Cutting width system :controlled by servo motor adjustable equipped with ball spline screw to secure accuracy

4.4.Circular blade move: controlled by servo motor adjustable equipped with ball spline screw to secure accuracy

4.5 Angle system: controlled by servo motor adjustable equipped with ball spline screw to secure accuracy

4.6. Controlling system     P.L.C automatic detective system

4.7. Cooling system         dropping water

4.8. Circular blade       14″double-blade knife， 355mmX1″X 2.0 C (import product)

4.9. Sliding part                        straight track

4.10. Steadier of the shaft’s end:      air-press automatic nose-spike

4.11 cutting shaft:   one 3" cutting shaft( invented by ourselves)

4.12. Main machine setting        touching panel system( import product)

4.13. Circular blade guard: invented by ourselves

4.14. Dust-proof apparatus:   water-proof, dust-proof

cleading    (import product)                        

4.15 Accessories             PE tube       1sets

4.16 Tools for repair:       general repair tools

5、Accessories list：